HSDJETS HF-18 FRP Turbine JollyRoger composite Colors PNP

Manufacturer: HSDJETS
Availability: In stock
SKU: A71 01 02 00 WP
$3,299.90

SPECIFICATIONS:

Wingspan 1125mm (44.3in)
Length 1760mm (69.3in)
Flying Weight 25-27lbs wet.  18lbs without batteries, engine or fuel
Recommended engine thrust 8 kg / 20~17.6 (Lb)
Cruising speed 260 km/h
Flying time 5~8 mins
Wing area --- dm2
Wing load --- g/dm2
Main material Composite material + Fiberglass
Painting surface Highlight environmental protection paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 12+ channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 2200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)
Servos(included in PNP only)

12g×1 PCS / 65g×2 PCS / 27g×6 PCS

Servo material All metal high-speed gear digital servo
Ailerons Yes (±16mm)
Flaps Yes (+20mm,+40mm)
Elevator(Horizontal tail) Yes (±28mm)
Rudder(Vertical tail) Yes (±20mm)
Smoking system ---
Front wheel correction Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Yes
Packaging / Size EPE pearl cotton+double-layer cardboard box (1790×420×500mm)
CG (Center of Gravity) 95~100 mm leading edge of main wing
Landing Gears All-metal simulation electronic retractable landing gear×3
Battery Charger LiPo battery charger (required & not included)


REQUIRES:

  • 12 channel radio system(radio & receiver) (required & not included)
  • 2S / 7.4V / 2200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
  • According to engine matching Power Battery×1(required & not included)
  • LiPo battery charger (required & not included)

SPECIFICATIONS:

Wingspan 1125mm (44.3in)
Length 1760mm (69.3in)
Flying Weight 25-27lbs wet.  18lbs without batteries, engine or fuel
Recommended engine thrust 8 kg / 20~17.6 (Lb)
Cruising speed 260 km/h
Flying time 5~8 mins
Wing area --- dm2
Wing load --- g/dm2
Main material Composite material + Fiberglass
Painting surface Highlight environmental protection paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 12+ channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 2200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)
Servos(included in PNP only)

12g×1 PCS / 65g×2 PCS / 27g×6 PCS

Servo material All metal high-speed gear digital servo
Ailerons Yes (±16mm)
Flaps Yes (+20mm,+40mm)
Elevator(Horizontal tail) Yes (±28mm)
Rudder(Vertical tail) Yes (±20mm)
Smoking system ---
Front wheel correction Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Yes
Packaging / Size EPE pearl cotton+double-layer cardboard box (1790×420×500mm)
CG (Center of Gravity) 95~100 mm leading edge of main wing
Landing Gears All-metal simulation electronic retractable landing gear×3
Battery Charger LiPo battery charger (required & not included)


REQUIRES:

  • 12 channel radio system(radio & receiver) (required & not included)
  • 2S / 7.4V / 2200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
  • According to engine matching Power Battery×1(required & not included)
  • LiPo battery charger (required & not included)
Write your own review
  • Only registered users can write reviews
  • Product can be reviewed only after purchasing it
*
*
  • Bad
  • Excellent