Wingspan |
1665 mm (65.6 in) |
Length |
1916 mm (75.4 in) |
Flying Weight |
8.3kg (18.3 lb) with 12S / 22.2V / 5200mAh / 45C Li-Po×2 PCS |
Flying time |
3~5 minutes |
Wing area |
53.6 dm2 |
Wing load |
154.9 g/dm2 |
Main material |
35 times EPO |
Painting surface |
Matte environmental water-borne paint + decal |
Suitable experience level |
□Zero basis □Beginner ■Intermediate □Advanced |
PNP Assembly difficulty |
□☆10mins ■★☆30mins □★★60mins |
Suitable for ambient temperature |
0℃~40℃ |
Radio System |
8 channel (required & not included) |
Control System |
MFC-2085 |
Motor |
5268-KV640(Inner rotor) |
EDF |
S-EDF 120mm-10 blade |
ESC |
Hobbywing 160A brushless |
Servos |
25g×2 Metal gear with 80mm lead (Left & Right ailerons forward) 25g×2 Metal gear with 80mm lead (Left & Right flap forward) 25g×1 Metal gear with 80mm lead (Vertical tail forward) 25g×2 Metal gear with 80mm lead (Left & Right Elevator forward) 7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12g×1 Metal gear with 380mm lead with protection function (Front wheel cover plate forward) 7.4V 12g×2 Metal gear with 380mm lead with protection function (Retarder plate forward) 7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
|
Recommended Power Battery |
6S,22.2V,5200mAh,45C×2,LiPo with AS150 type plug(required & not included) |
Recommended Receiver Battery |
2S,7.4V,2200~5200mAh×2,LiPo with XT60 type plug(required & not included) |
Ailerons |
Yes |
Flaps |
Yes |
Elevator(Horizontal tail) |
Yes |
Rudder(Vertical tail) |
Yes |
LED lights system |
Yes |
Electromagnetic brake system |
Yes |
Air Brakes
|
Yes |
Reinforced gyro |
Selective configuration (not included) |
Packaging / Size |
EPO Inner box + Outer Box /1343×515×450(mm) |
CG (Center of Gravity) |
120~125mm from the leading edge of the Main Wing |
Landing Gears |
All metal hydraulic simulation electric retractable landing gear×3 |
Battery Charger |
LiPo battery charger (required & not included) |