My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors PNP*

My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors PNP
Manufacturer: HSDJETS
Availability: In stock
SKU: A99 01 01 00
$1,499.90

SPECIFICATIONS:

Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb)with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed ≈200 km/h
Flying time 4~6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 9 channel (required & not included)
Control System MFC-2085
Servos

7.4V 40g×1 Metal gear with 80mm lead (Elevator forward)
7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25g×2 Metal gear with 410mm lead (Left & right flaps ×2 forward)
7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward)
7.4V 12g×2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate ×2 forward)
7.4V 12g×2 Metal gear with 600mm lead with protection function (Rear wheel cover plate ×2 forward)

Recommended Battery 2S,7.4V,2200~5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder(Vertical tail) Yes
The smoke system Included
Speed brake No
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap No
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/55.9×19.7×16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3(Nose gear single wheel)
Battery Charger LiPo battery charger (required & not included)



PACKAGE INCLUDES:

  • Fuselage×1 pcs
  • Left main wing×1 pcs
  • Right main wing×1 pcs
  • Nose×1 pcs
  • Cockpit×1 pcs
  • Vertical tail×1 pcs
  • L&R Horizontal tail×1 pcs
  • Main wing carbon tube L=730mm external diameter 15.6mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HM3×10mm)×10 pcs (Wing/Horizontal tail/Vertical tail)
    • Screw (HM4×50mm)×4 pcs (Nose)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male) ×8 pcs
  • Accessories Bag 3 ×1 pcs
    • Filler tube ×1 pcs
    • Left and right pitot tubes ×2 pcs
    • Nose radar antenna ×1 pcs
    • Upper and lower fuselage antenna ×2 pcs
    • Remove the ribbon before flight ×1 pcs
    • Oil tank overflow vent plug ×1 pcs
  • Manual×1 pcs

REQUIRES:
  • 8KG turbine engine (required & not included)
  • 9 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,2200~5200mAh×2,LiPo with XT60 type plug(required & not included)
  • LiPo battery charger (required & not included)

SPECIFICATIONS:

Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb)with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed ≈200 km/h
Flying time 4~6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 9 channel (required & not included)
Control System MFC-2085
Servos

7.4V 40g×1 Metal gear with 80mm lead (Elevator forward)
7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25g×2 Metal gear with 410mm lead (Left & right flaps ×2 forward)
7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward)
7.4V 12g×2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate ×2 forward)
7.4V 12g×2 Metal gear with 600mm lead with protection function (Rear wheel cover plate ×2 forward)

Recommended Battery 2S,7.4V,2200~5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder(Vertical tail) Yes
The smoke system Yes
Speed brake No
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap No
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/55.9×19.7×16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3(Nose gear single wheel)
Battery Charger LiPo battery charger (required & not included)



PACKAGE INCLUDES:

  • Fuselage×1 pcs
  • Left main wing×1 pcs
  • Right main wing×1 pcs
  • Nose×1 pcs
  • Cockpit×1 pcs
  • Vertical tail×1 pcs
  • L&R Horizontal tail×1 pcs
  • Main wing carbon tube L=730mm external diameter 15.6mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HM3×10mm)×10 pcs (Wing/Horizontal tail/Vertical tail)
    • Screw (HM4×50mm)×4 pcs (Nose)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male) ×8 pcs
  • Accessories Bag 3 ×1 pcs
    • Filler tube ×1 pcs
    • Left and right pitot tubes ×2 pcs
    • Nose radar antenna ×1 pcs
    • Upper and lower fuselage antenna ×2 pcs
    • Remove the ribbon before flight ×1 pcs
    • Oil tank overflow vent plug ×1 pcs
  • Manual×1 pcs

REQUIRES:
  • 8KG turbine engine (required & not included)
  • 9 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,2200~5200mAh×2,LiPo with XT60 type plug(required & not included)
  • LiPo battery charger (required & not included)
Write your own review
  • Only registered users can write reviews
  • Product can be reviewed only after purchasing it
*
*
  • Bad
  • Excellent