| Wingspan |
1665 mm (65.6 in) |
| Length |
1916 mm (75.4 in) |
| Flying Weight |
8.3kg (18.3 lb) |
| Flying time |
About 3-5 mins |
| Wing area |
53.6 dm2 |
| Wing load |
154.9 g/dm2 |
| Main material |
35 times EPO |
| Painting surface |
Matte environmental water-borne paint + decal |
| Suitable experience level |
□Zero basis □Beginner ■Intermediate □Advanced |
| PNP Assembly difficulty |
□☆10mins ■★☆30mins □★★60mins |
| Suitable for ambient temperature |
0℃～40℃ |
| Radio System |
8 channel (required & not included) |
| Control System |
MFC-2085 |
| Motor |
5268-640KV(inner rotor) |
| EDF |
S-EDF 120mm 10 Blade |
| ESC |
160A Hobbywing Brushless |
| Servos |
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 380mm lead with protection function (Speed brake forward)
25g×2 Metal gear with 90mm lead (left & right ailerons forward)
25g×2 Metal gear with 90mm lead (left & right flap forward)
25g×2 Metal gear with 90mm lead (left & right Elevator forward)
25g×1 Metal gear with 90mm lead (Vertical tail forward)
|
| Recommended Power Battery |
6S,22.2V,5200mAh,45C×2,LiPo with AS150 type plug(required & not included) |
| Recommended Receiver Battery |
2S,7.4V,2200～5200mAh×2,LiPo with XT60 type plug(required & not included) |
| Ailerons |
Yes |
| Flaps |
Yes |
| Elevator(Horizontal tail) |
Yes |
| Rudder(Vertical tail) |
Yes |
| LED lights system |
Yes |
| Electromagnetic brake system |
Yes |
| Reinforced gyro |
not included |
| Packaging / Size |
EPO Inner box + Outer Box (1343×515×450mm) |
| CG (Center of Gravity) |
105～110mm from the leading edge of the Main Wing |
| Landing Gears |
All metal hydraulic simulation electric retractable landing gear×3 |
| Battery Charger |
LiPo battery charger (required & not included) |
